Base Plate; Attachment Of Base Plate - Hamamatsu Photonics ORCA-Fire C16240-20UP Instruction Manual

8. Base plate

•
•
8-1

ATTACHMENT OF BASE PLATE

1. Prepare a C16240-20UP.
 Put the base plate on the plane where the base plate is fixed.
• Base plate should be placed as shown in the above picture. (More screw holes should be
in camera front side)
•
Do not install the baseplate on a surface with fan vents.
2. Fasten screws.
Insert 4 screws into 4 holes marked in the following picture.
Digital CMOS Camera C16240-20UP / C16240-20UP01 Instruction manual_Ver.1.3
Do this procedure on the stable working space and conditions.
Do not use other screws nor other wrench which were not included.
17