Maintenance; Care - Hamamatsu Photonics ORCA-Fire C16240-20UP Instruction Manual

Table of Contents

Advertisement

12. MAINTENANCE

12-1 CARE

Perform cleaning of this equipment with the dry soft cloth.
Do not wipe with a damp cloth or unclean cloth.
Then, the glass window on the image sensor should be cleaned according to the following.
1. Blow the dust from the glass window with an air duster.
2. Moisten a lens cleaning paper with a little ethanol, and wipe over center area of the window,
gently.
3. Confirm whether dust is not left.
Attach the camera to an optics, and check if there is dust or not under the uniform light condition. If
there is dust on the image, clean the glass window again.
Use Lens Cleaning Paper for cleaning of glass window in front of the image sensor.
Use a plastic tweezers and take extra care not to scratch the glass window with the
tweezers. Even with plastic tweezers, there is possibility to make scratch on the glass
window in case tweezers touch it.
Avoid touching the surrounding parts of image area when wiping the glass window.
Digital CMOS Camera C16240-20UP / C16240-20UP01 Instruction manual_Ver.1.3
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Orca-fire c16240-20up01

Table of Contents