Hamamatsu Photonics ORCA-Fire C16240-20UP Instruction Manual page 13

Table of Contents

Advertisement

(9) Camera readout modes
The camera has two kinds of readout mode, Area readout mode and Lightsheet readout mode.
The camera also has four readout direction in Lightsheet readout mode.
(Camera readout modes)
Area readout mode
Lightsheet readout mode
(10) Camera operation modes
The camera has three operation modes: 1) Free running mode, in which the exposure and readout
timing are controlled by the internal microprocessor, 2) External trigger mode, in which the
exposure and readout timing are decided by an external trigger, and 3) Start trigger mode is used
to start operating the camera by a trigger input for a continuous imaging.
(Camera readout modes)
Area readout mode
Light sheet readout mode
Digital CMOS Camera C16240-20UP / C16240-20UP01 Instruction manual_Ver.1.3
(Scan speed)
Standard scan
Standard scan
(Camera operation modes)
Free running mode
External trigger mode
Start trigger mode
Free running mode
External trigger mode
Start trigger mode
(Readout direction)
Top to Bottom
Bottom to Top
Bidirectional Mode
Reverse
Bidirectional Mode
(External trigger modes)
Edge trigger mode
Global reset
Edge trigger mode
Level trigger mode
Global reset
Level trigger mode
Synchronous readout
trigger mode
Edge trigger mode
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Orca-fire c16240-20up01

Table of Contents