Glossary Of Terms - Chore-Time ATF PLUS Installation And Operator's Manual

Glossary of Terms

Glossary of Terms
Sensor Plus control:
Clamp:
A two-piece, riveted strap used to
secure auger tubes together.
Adjustment Leveler:
A cable locking devise used to
conveniently adjust the feeder to a level
position.
Throw-back:
A cable/pulley arrangement that allows cable to be routed to a
desired location.
Double-back:
A cable/pulley arrangement that reduces the load on the Power
Winch.
Power Lift:
Red, cast iron winch used to raise and lower the feeder line(s).
Operated by a hand crank or electric drill. Referred to as Power
Winch.
8
Electronic Switch
A feeder, equipped with a switch,
(located at the power unit), used
to control the feeding system.
MODEL ATF™ PLUS Feeding System
End control:
Mechanical Switch
A feeder, equipped with a
switch, (located at the power
unit), used to control the
feeding system.
Anti-Roost Bracket:
An insulator and bracket assembly mounted on
every fourth or fifth clamp to support shocker
wire.
Drop Line:
A section of cable fastened
to the main cable, routed
through a pulley, down to
the feeder line.
MF1814C