Glossary Of Terms - Chore-Time H2 Installation And Operator's Manual

MODEL H2™ Feeding System

Glossary of Terms

Mid-Line control:
Clamp:
A two-piece, riveted strap used to
secure auger tubes together.
Adjustment Leveler:
A cable locking devise used to
conveniently adjust the feeder to a level
position.
Throw-back:
A cable/pulley arrangement that allows cable to be routed to a
desired location.
Double-back:
A cable/pulley arrangement that reduces the load on the Power
Winch.
Power Lift:
Red, cast iron winch used to raise and lower the feeder line(s).
Operated by a hand crank or electric drill. Referred to as Power
Winch.
Electro-Guard:
A high voltage, low current shocking device used to keep birds
from setting on the feeder line.
MF830E
A feeder, equipped
with a switch, (located
near the center of the
feeder line) used to
control the feeding
system when partial
house brooding.
End control:
Anti-Roost Bracket:
An insulator and bracket assembly mounted on
every fourth or fifth clamp to support shocker
wire.
Drop Line:
Glossary of Terms
A feeder, equipped with a
switch, (located at the
power unit) used to control
the feeding system.
A section of cable fastened
to the main cable, routed
through a pulley, down to
the feeder line.
11