Tone Encode - L3Harris XL Extreme Series Operator's Manual

Possible faults include:
• BATTERY FAULT- Replace battery.
EEPROM FAULT - Contact L3Harris.
•
RF FAULT - Contact L3Harris.
•
OVERCURRENT - Check antenna and antenna connection. Try replacing antenna.
•
INVALID SYSTEM - Feature not installed.
•
CHANNEL FAULT - Channel frequency programmed is not valid for this radio.
•
5. If you view but do not delete the fault, the alert icon goes away on the idle display.
6. Contact L3Harris for assistance with diagnosing a fault.

6.19 TONE ENCODE

Tone Encode is a generic tone encoding scheme for call identification when transmitting on a
conventional system. It supports generic user-definable tone encode (up to 15 tones), Type 99
(up to 2 tones) and 5/1 Tone (up to 5 tones) encoding formats.
Tone encoding schemes are used to transmit calls to one or more target radios that have been
programmed with the correct tone decode sequence. When the receiving radio detects its tone
decode sequence, it unmutes on the call.
To select a Tone Encode option:
1. Press the Menu/Select button to access the main menu.
2. Press the left or right navigation buttons to display the CALL menu.
3. Press the up or down navigation buttons to highlight TONE ENCODE and press the
Menu/Select button.
4. Select the desired Tone Encode option from the list.
14221-1800-2050, Rev. G
95