Situational Awareness (Sa) - P25 Conventional Only - L3Harris XL Extreme Series Operator's Manual

14221-1800-2050, Rev. G
6.2 SITUATIONAL AWARENESS (SA) – P25 CONVENTIONAL ONLY
Situational Awareness is a feature in which the radio receives SA position from other units
configured to send the SA packets. The SA display shows the positions of the other radios (units)
relative to the radio. To make use of SA, all radios need to have a uniquely programmed Unit ID.
To display Situational Awareness Info:
1. Press the Menu/Select button to access the main menu.
2. Press the left or right navigation buttons to display the UTILITY menu.
3. Press the up or down navigation buttons to select GPS and press the Menu/Select button.
4. Press the up or down navigation buttons to select POSITION INFO and press the Menu/Select
button.
5. Press the NEXT soft key.
6. Press the left or right navigation buttons to view the location of each unit. The color of each
unit indicates its status as follows. Only one status can be shown at a time and are listed in
priority order:
Grey – Unselected, no status
•
Red – Unselected, In Emergency
•
• Orange – Unselected, Low Battery
Blue – Unselected, Scanning
•
• Green – Selected, no status
• Green/Red – Selected, In Emergency
Green/Orange – Selected, Low Battery
•
• Green/Blue – Selected, Scanning
7. GPS of this radio is shown by the center dot as follows:
Green – Tracking
•
• Orange – Last known position
Red – Searching
•
72