Regulatory And Safety Information; Safety Conventions; Over-Temperature Condition; Rated Transmitter Rf Output Power - L3Harris XL Extreme Series Operator's Manual

Table of Contents

14221-1800-2050, Rev. G

REGULATORY AND SAFETY INFORMATION

1.1

The following conventions are used throughout this manual to alert the user to general safety

precautions that must be observed during all phases of operation, service, and repair of this

product. Failure to comply with these precautions or with specific warning elsewhere in this

manual violates safety standards of design, manufacture, and intended use of the product.

L3Harris assumes no liability for the customer's failure to comply with these standards.

The WARNING symbol calls attention to a procedure, practice, or the like,

which, if not correctly performed or adhered to, could result in personal

injury. Do not proceed beyond a WARNING symbol until the conditions

identified are fully understood or met.

WARNING

The CAUTION symbol calls attention to an operating procedure, practice, or the

like, which, if not performed correctly or adhered to, could result in damage to the

equipment or severely degrade the equipment performance.

CAUTION

The NOTE symbol calls attention to supplemental information, which may improve

system performance or clarify a process or procedure.

NOTE

1.2

When the radio reaches an internal temperature of 102°C, the high temperature alarm sounds.

Alerts are indicated via the LED, an OVERTEMP alert on the display and voice announcements.

The radio must be removed from service after an over-temperature condition.

1.3

FREQUENCY

VHF

UHF

700 MHz

800 MHz

RATED RF POWER OUTPUT

6.0 W (5.0 W in Hazard Mode)

5.0 W

3.0 W

Table of Contents