Site Lock; Radio Status - L3Harris XL Extreme Series Operator's Manual

14221-1800-2050, Rev. G

6.14.8 Site Lock

The Site Lock feature provides a list of available, adjacent sites that the user can lock the radio
to. This restricts the radio from roaming between sites. Up to 512 sites can be programmed to the
radio.
NOTE
1. Press the Menu/Select button to access the main menu.
2. Press the left or right navigation buttons to display the SCAN menu.
3. Press the up or down navigation buttons to highlight SITE ALIAS.
4. Press the Menu/Select button to display the list of available sites. If a Site Alias is programmed
for the available site(s), it is displayed here. Otherwise, the system name is displayed.
5. From the OPTIONS menu, select LOCK SITE or SWITCH SITE.

6.15 RADIO STATUS

The status feature allows the radio user to send a status condition to the site without making a
voice call. There can be up to 10 status conditions programmed into the radio. For each status
defined, there is an ID and an alphanumeric name. The ID is sent to the site and the alphanumeric
name appears on the radio display when the ID corresponds with the information programmed at
the site.
NOTE
90
Site Lock is only supported on P25 Trunked Systems with Enhanced CC Scan
enabled.
A button on the radio can be programmed to access the Site Alias list (see
Section 7.5).
A button on the radio can be programmed to send a radio status (see Section
7.5).