Programming; L3Harris Device Management - L3Harris XL Extreme Series Operator's Manual

7.

PROGRAMMING

This section provides information on front panel programming. Programming can also be
accomplished by creating a plan using a computer with RPM2 installed.
7.1

L3HARRIS DEVICE MANAGEMENT

L3Harris Device Management is a web-based application that allows the user to collect basic
status and version information, read and program personalities, and program firmware in XL
radios over LTE or secure Wi-Fi. Refer to the L3Harris Device Management User's Manual
14221-2100-2010 for information about using the application.
To initiate Device Management Actions from the radio:
The radio only communicates with L3Harris Device Management when initiated by the user as
shown in the following steps:
1. From the radio menu select UTILITY  DEVICE MANAGEMENT.
2. Verify the CONNECTION STATUS is CONNECTED.
3. Highlight and select DM ACTIONS to check for available updates.
4. The DM ACTIONS menu displays CHECKING while searching for updates. This will change
to UPDATE AVAILABLE if there are available updates.
5. Select DOWNLOAD & INSTALL to install available updates.
14221-1800-2050, Rev. G
101