Receive A Group Call - L3Harris XL Extreme Series Operator's Manual

Or
To transmit a group call:
1. In P25 Conventional, the talkgroup for the selected channel may be overridden as follows:
Press the Menu/Select button to access the main menu.
2. Press the left or right navigation buttons to display the CALL menu.
3. Press the up or down navigation buttons to highlight CHANGE TLKGRP and press the
Menu/Select button.
4. Press the up or down navigation buttons to highlight and the desired talkgroup and press the
Menu/Select button. After selecting the new talkgroup, the radio returns to the main screen.
5. Press the PTT button to transmit.

5.14.2 Receive a Group Call

When receiving a group call, the status area of the idle display toggles between the Unit Name
and the Group Name of the transmitting radio. If either of those names is not programmed, the
corresponding ID number is displayed.
If an in-band alias for the transmitting radio/console is sent to the receiving
radios, the receiving radios display that alias instead of the Unit ID or the I-
CALL/Alias set contained in the receiving radio's personality, if any. The Alias
alternates with the talkgroup name in the lower right display of the radio.
14221-1800-2050, Rev. G
45