L3Harris XL Extreme Series Operator's Manual page 41

MENUS
GPS SETTINGS:
• GPS (ENABLED/DISABLED)
• POSITION INFO
• ANGULAR UNITS
• LINEAR UNITS
• POSITION FORMAT
• SA OVER NETWORK
PROGRAM:
• ACTIVATE PLAN
• PROFILES
MAINTENANCE:
• BATTERY INFO
RADIO INFO
•
• RESET OVERTEMP EVENT
TESTS
•
PH2 LC DISPLAY
•
• DISPLAY RSSI
TCXO TUNING
•
FEATURE INFO
•
WIFI CLIENT:
• POWER ON
• ADD NEW
WIFI ACCESS POINT:
• POWER
• CLIENT COUNT
LTE:
• PLMN (MCC/MNC)
• Signal Strength
• Registration Status
• NGLM
• IMEI
• IMSI
ICON GLOSSARY
USER LOGIN
• SYSTEM ID
• UNIT ID
• PASSWORD
DEVICE MANAGEMENT
STEALTH MODE SETTINGS
• LCD ENABLED
• LED ENABLED
• BACKLIGHT ENABLED
• SIDE/ALERT TONES ENABLED
Enable/disable GPS.
Displays GPS, Latitude, Longitude, and Altitude information. From this menu, click NEXT to
access SA INFO (see Section 6.2).
Set unit of measurement of displayed angular units: CARDINAL, DEGREES, or MILS.
Set unit of measurement of displayed linear units: STATUTE, METRIC, or NAUTICAL.
Set format of displayed position information: Latitude/Longitude Decimal Degrees (LAT
LONG DD), Latitude/Longitude Degrees Minutes Seconds (LAT/LONG DMS), LAT/LONG
DM, Military Grid Reference System (MGRS), or Universal Transverse Mercator (UTM).
When Enabled, the radio sends GPS data to a L3Harris-supplied PC client using RNDIS
networking.
View/Activate a personality. See Section 6.1.
Change current profile. See Section 5.16.
When a smart battery is attached, displays detailed battery status information. When a
regular battery is attached, displays battery voltage.
Displays radio information, i.e., ESN, software revisions, and firmware revisions.
Reset an overtemp event. Requires entering the Maintenance Password. This menu item
cannot be disabled.
Allows service personnel to run radio tests.
For field service use only.
When enabled, RSSI is displayed on the RSSI screen and in the bottom of the idle display.
-130 dBm is displayed when there is no received signal.
For field service personnel only. Improper adjustment will result in loss of communications.
Displays what features are enabled on your radio.
Displays the list of available Wi-Fi clients and the status of Wi-Fi Connection (a question
mark indicates the Wi-Fi network is in the process of connecting; a check mark indicates
the Wi-Fi Network is connected).
Turn Wi-Fi on/off.
Displays the list of Trusted Wi-Fi Networks and is populated when Wi-Fi is powered on.
You can view, add, modify, and remove a Wi-Fi Network.
Power Wi-Fi On/Off.
When the radio is configured as a Wi-Fi access point, displays the number of connected
clients. Selecting CLIENT COUNT will display the MAC addresses of connected clients.
Displays the Public Land Mobile Network (Mobile Country Code/Mobile Network Code).
Displays the LTE signal strength.
Indicates if you are registered (connected) to the LTE network.
Displays the Next Generation LTE Module's software revision.
Displays the International Mobile Equipment Identity. The IMEI is used to identify devices
on a network.
Displays the International Mobile Subscriber Identity. The IMSI is used to identify the user
of a cellular network and is a unique identification associated with all cellular networks.
Defines icons displayed by the radio.
Enables the radio user to login. See Section 5.4.1 for more information.
Allows the radio user to enter/change the System ID for user login.
Allows the radio user to enter/change the User ID for user login.
Allows the radio user to enter the login password for user login.
Allows the user to check for and install updates from the L3Harris Device Management
application over Wi-Fi.
Allows the user to toggle features on/off when Stealth Mode is enabled.
Toggle LCD on/off when Stealth Mode
Toggle LED on/off when Stealth Mode
Toggle backlight on/off when Stealth Mode
Toggle side/alert tones on/off when
14221-1800-2050, Rev. G
DESCRIPTION
is enabled.
is enabled.
is enabled.
Stealth Mode is enabled.
41