Clock Settings; Battery Info - L3Harris XL Extreme Series Operator's Manual

5. If the LED is blinking between light red and dark red, then the amp is in programming mode.
If you try to pair with the amplifier in this mode, it will identify itself as an RI version. Turn off
power and restart from step 1.

6.11 CLOCK SETTINGS

To view/change clock settings:
1. Press the Menu/Select button to access the main menu.
2. Press the left or right navigation buttons to display the UTILITY menu.
3. Press the up or down navigation buttons to highlight CLOCK SETTINGS and press the
Menu/Select button.
4. Use the up or down navigation buttons and Menu/Select button to change settings as desired:
TIME FORMAT- Set 12 or 24-hour time display format.
•
TIME ZONE - Set time zone relative to Universal Time Coordinated (UTC).
•
5. Press the BACK soft key to exit.

6.12 BATTERY INFO

To display battery information:
1. Press the Menu/Select button to access the main menu.
2. Press the left or right navigation buttons to display the UTILITY menu.
3. Press the up or down navigation buttons to highlight MAINTENANCE and press the
Menu/Select button.
4. Press the up or down navigation buttons to highlight BATTERY INFO and press the
Menu/Select button.
14221-1800-2050, Rev. G
83