Radio Message - L3Harris XL Extreme Series Operator's Manual

To send a radio status:
1. Press the Menu/Select button to access the main menu.
2. Press the left or right navigation buttons to display the MESSAGES menu.
3. Press the up or down navigation buttons to highlight RADIO STATUS and press the
Menu/Select button.
4. Use the up or down navigation buttons and the Menu/Select button to highlight and select
desired status.

6.16 RADIO MESSAGE

The message feature is used to send a message to the site without making a voice call. There
can be up to 10 messages programmed into the radio. For each message defined, there is an ID
and an alphanumeric name. The ID is sent to the site and the alphanumeric name appears on the
radio display when the ID corresponds with the information programmed at the site.
NOTE
To send a radio message:
1. Press the Menu/Select button to access the main menu.
2. Press the left or right navigation buttons to display the MESSAGES menu.
3. Press the up or down navigation buttons to highlight RADIO MESSAGE and press the
Menu/Select button.
A button on the radio can be programmed to send a radio message (see Section
7.5).
14221-1800-2050, Rev. G
91