Start Scan - L3Harris XL Extreme Series Operator's Manual

5.29 START SCAN

This procedure assumes that the scan list has been added and the radio is not in active scan.
Refer to Section 6.13 for scan setup or Section 5.30 for stopping scan. Refer to Section 6.14.1.1,
Section 6.14.1.2, and Section 6.14.1.3 for home and priority channel descriptions.
To start scan:
1. Press the Menu/Select button to access the main menu.
2. Press the left or right navigation buttons to display the SCAN menu.
3. Press the up or down navigation buttons to highlight START SCAN and press the Menu/Select
button. START SCAN text changes to STOP SCAN.
4. Press the BACK soft key to exit the scan menu.
5. The scan icon is displayed on the idle display when scanning is enabled.
Or
To start scan:
1. Press the Menu/Select button to access the main menu.
2. Press the left or right navigation buttons to display the SCAN menu.
3. Press the up or down navigation buttons to highlight SCAN LISTS and press the Menu/Select
button.
4. Press the up or down navigation buttons to highlight the desired SCAN LIST and press the
START SCAN soft key.
Or
A switch or button on the radio can be programmed to start/stop scan.
14221-1800-2050, Rev. G
59