Alternate trigger (Trigger Type: Slope) menu list:
Menu
Alternate
Mode
Source
When
Threshol
d
Mode
Holdoff
Alternate trigger (Trigger Mode: Pulse)
►
Alternate trigger (Trigger Type: Pulse) Menu is shown as Figure 37.
June 2016
Settings
Slope
Set vertical channel trigger type as slope trigger.
CH1
Select CH1 as the trigger source.
CH2
Select CH2 as the trigger source.
slope
Select slope condition.
Set slope condition; turn the M knob to set time.
Turn the M knob to set the High level.
High level
Turn the M knob to set Low level.
Low level
Slew rate
Slew rate=( High level- Low level)/ Settings.
Auto
Acquire waveform even no trigger occurred.
Holdoff
100ns~10s, adjust the M knob to set time interval
before another trigger occur.
Set Holdoff time as 100ns.
Reset
Figure 37. Alternate trigger (Trigger Type: Pulse) Menu.
Instruction
41
Page