To invert a waveform
►
Waveform inverted: the displayed signal is turned 180 degrees against the
phase of the earth potential.
Taking the Channel 1 for example, the operation steps are shown as
follows:
Press the CH1 MENU button and call out the CH1 SETUP menu.
Press the H2 menu selection button and select ON for Inverted item.
The waveform is inverted as it is shown in Figure 18.
Press the H2 menu selection button again and select OFF for Inverted
item. The waveform goes back to its original one as it is shown in
Figure 17.
June 2016
Figure 17. Original Waveform.
21
Page