Table of Contents
Advertisement
Alternate trigger (Trigger Type: Pulse) menu list:
Menu
Alternate
Mode
Source
Coupling
when
Mode
Holdoff
42
Page
Settings
Pulse
Set vertical channel trigger type as pulse trigger.
CH1
Select CH1 as the trigger source.
CH2
Select CH2 as the trigger source.
AC
Not allow DC portion to pass.
DC
Allow all portion pass.
HF
Not allow high frequency of signal pass and only
low frequency portion pass.
LF
Not allow low frequency of signal pass and only
high frequency portion pass.
Polarity
Choose the polarity.
Select pulse width condition and turn the M knob to
set time.
Auto
Acquire waveform even no trigger occurred.
100ns~10s, adjust M knob to set time interval
Holdoff
before another trigger occur.
Reset
Set Holdoff time as 100ns.
Instruction
June 2016
Advertisement
Table of Contents
