The Cursor Measurement For Fft Mode - Promax OD-603 Manual

Press the H1 button, the Type menu will display at the right of the
screen. Press the F3 button to select Time for Type, with two purple
dotted lines displayed along the vertical direction of the screen, which
indicating Cursor 1 and Cursor 2.
According to the measured waveform, adjust the positions of Cursor1
and Cursor2 by turning the VERTICAL POSITION knob of CH1 and
CH2. The cursor increment window at the left bottom of the waveform
shows absolute difference, frequency and the present time of the two
cursors.
3.5.7.2

The Cursor Measurement for FFT mode

Press the Cursor button to display the cursor measurement function menu
(CURS MEAS) in the screen, which includes Vamp Measurement and Freq
Measurement at the mode of FFT, shown as Figure 68.
68
Page
Figure 67. Waveform of Cursor Measurement.
Figure 68. CURS MEAS Menu.
June 2016