Theory of Operation
LAN Interface
LAN Interface
See the "System Configuration" section of the N9923A FieldFox RF Vector
Network Analyzer User's Guide (Part Number N9923-90001) for details on
reviewing and configuring LAN settings.
The LAN interface supports Auto MDIX. When a LAN cable is connected to the
FieldFox, if the other end of the cable supports Auto MDIX, there is no need for
a cross-over cable.
There are two LEDs on the LAN connector. When there is successful
communication over a LAN cable, both LEDs are active. If both LEDs are not
active, consider using a cross-over cable.
5-26
Keysight N9923A Service Guide