Teledyne Linea Color GigE LA-GC-02k05B User Manual page 95

LLA Supported
DHCP Supported
Persistent IP Supported
GVCP Extended Status
Codes
Gev MCP HostPort
Gev MCDA
Gev MCSP
Stream Channel Interface
Index
Gev SCP HostPort
Gev SCDA
Gev SCSP
Gev First URL
Gev Second URL
Gev Major Version
Gev Minor Version
Manifest Entry Selector
XML Major Version
Linea GigE Series Camera
GevSupportedIPConfigurationLLA
GevSupportedIPConfigurationDHCP
GevSupportedIPConfigurationPersistentIP
GevGVCPExtendedStatusCodes
GevMCPHostPort
GevMCDA
GevMCSP
GevSCPInterfaceIndex
GevSCPHostPort
GevSCDA
GevSCSP
GevFirstURL
GevSecondURL
GevVersionMajor
GevVersionMinor
DeviceManifestEntrySelector
DeviceManifestXMLMajorVersion
Indicates if LLA (Auto-IP) is supported by the
selected interface. The LLA method
automatically assigns the camera with a
randomly chosen address on the
169.254.xxx.xxx subnet. After an address is
chosen, the link-local process sends an ARP
query with that IP onto the network to see if it
is already in use. If there is no response, the
IP is assigned to the device, otherwise another
IP is selected, and the ARP is repeated. Note
that LLA is unable to forward packets across
routers. LLA is the recommended scheme
when only one NIC is connected to GigE
cameras; ensure only one NIC is using LLA on
your PC, otherwise IP conflicts will result. (RO)
Indicates if DHCP is supported by the selected
interface. This IP configuration mode requires
a DHCP server to allocate an IP address
dynamically over the range of some defined
subnet. The camera must be configured to
have DHCP enabled. This is the factory default
settings. The DHCP server is part of a
managed network. Windows itself does not
provide a DHCP server function therefore a
dedicated DHCP server is required. The DALSA
Network Configuration Tool can be configured
as a DHCP server on the NIC used for the GigE
Vision network. (RO)
Indicates if Persistent IP is supported by the
selected interface. This protocol is only
suggested if the user fully controls the
assignment of IP addresses on the network
and a GigE Vision camera is connected beyond
routers. The GigE Vision camera is forced a
static IP address. The NIC IP address must use
the same subnet otherwise the camera is not
accessible. If the camera is connected to a
network with a different subnet, it cannot be
accessed. (RO)
Enables generation of extended status codes.
(RO)
Indicates the port to which the device must
send messages. (RO)
Indicates the destination IP address for the
message channel. (RO)
This feature indicates the source port for the
message channel. (RO)
Index of network interface. (RO)
Indicates the port to which the device must
send the data stream. (RO)
Indicates the destination IP address for this
stream channel. (RO)
Indicates the source port of the stream
channel. (RO)
Indicates the first URL to the XML device
description file. (RO)
Indicates the second URL to the XML device
description file. (RO)
Major version of the specification. (RO)
Minor version of the specification. (RO)
Selects the manifest entry to reference.
Indicates the major version number of the XML
file of the selected manifest entry. (RO)
Operational Reference • 93
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible