Teledyne Linea Color GigE LA-GC-02k05B User Manual page 89

Event Statistic Selector
Start of Acquisition
End of Acquisition
Start of Frame
End of Frame
Valid Frame Trigger
Invalid Frame Trigger
Image Lost
Invalid Line Trigger
Line Trigger Overlap
Line 1
Line 2
Line 3
Line 4
Line 3 Pulse Start
Line 4 Pulse Start
Line 5 Pulse Start
Line 6 Pulse Start
Event Statistic Count
Event Statistic Count
Reset
Acquisition Start Data
Acquisition End Data
Acquisition Start Event
ID
Acquisition Start Event
Timestamp
Acquisition End Event ID
Acquisition End Event
Timestamp
Frame Start Data
Frame Start Event ID
Frame Start Event
Timestamp
Linea GigE Series Camera
eventStatisticSelector
AcquisitionStart
AcquisitionEnd
FrameStart
FrameEnd
ValidFrameTrigger
InvalidFrameTrigger
ImageLost
InvalidLineTrigger
LineTriggerOverlap
Line3PulseStart
Line4PulseStart
Line5PulseStart
Line6PulseStart
eventStatisticCount
eventStatisticCountReset
EventAcquisitionStartData
EventAcquisitionEndData
EventAcquisitionStart
EventAcquisitionStartTimestamp
EventAcquisitionEnd
EventAcquisitionEndTimestamp
EventFrameStartData
EventFrameStart
EventFrameStartTimestamp
Selects which Event statistic to display.
Event sent on control channel on acquisition start.
Event sent on control channel on acquisition end.
Event sent on control channel on an Active Frame. This
occurs with the start of the exposure delay.
Event sent on control channel on an Active Frame end.
Event sent on control channel when a valid frame trigger is
generated.
Event sent on control channel when a frame trigger occurs
in an invalid Trigger region. Therefore the trigger is
rejected and no frame acquisition occurs.
Event sent on control channel when an image is lost due to
insufficient memory.
Event sent on control channel when a line trigger occurs in
an invalid Trigger region. Therefore the trigger is rejected
and no frame acquisition occurs.
Event sent on control channel when a line trigger occurs in
an invalid trigger region and was delayed by the camera
into a valid region.
Line1 Event sent on control channel when a state change occurs
on line 1.
Event sent on control channel when a state change occurs
Line2
on line 2.
Event sent on control channel when a state change occurs
Line3
on line 3.
Line4 Event sent on control channel when a state change occurs
on line 4.
Event sent on control channel when a pulse is generated
on line 3.
Event sent on control channel when a pulse is generated
on line 4.
Event sent on control channel when a pulse is generated
on line 5.
Event sent on control channel when a pulse is generated
on line 6.
Display the count of the selected Event.
Reset the count of the selected Event.
Data of the acquisition start event.
Data of the acquisition end event.
Represents the event ID to identify the
EventAcquisitionStart software event.
Timestamp of the EventAcquisitionStart event. (RO)
Represents the event ID to identify the
EventAcquisitionEnd software Event. (RO)
Timestamp of the EventAcquisitionEnd event. (RO)
Data of the frame start event.
Represents the event ID to identify the EventFrameStart
software Event. (RO)
Timestamp of the EventFrameStart event. (RO)
Operational Reference • 87
1.00
Expert
DFNC
1.00
Expert
DFNC
1.00
Expert
DFNC
1.00
Guru
1.00
Guru
1.00
Guru
1.00
Guru
1.00
Guru
1.00
Guru
1.00
Guru
1.00
Guru
1.00
Guru