Teledyne Linea Color GigE LA-GC-02k05B User Manual page 93

IP Configuration Status
None
PersistentIP
DHCP
LLA
ForceIP
Current IP Address
Current Subnet Mask
Current Default Gateway
Current IP set in LLA
Current IP set in DHCP
Current IP set in Persistent
IP
Primary Application IP
Address
Device Access Privilege
Control
Exclusive Access
Control Access
Discovery Acknowledge
Delay
Current Heartbeat Timeout
GVCP Heartbeat Disable
Communication Timeout
Communication
Retransmissions Count
Gev GVSP Extended ID
Mode
Stream Channel Selector
Fire Test Packet
MAC Address
Linea GigE Series Camera
GevIPConfigurationStatus
GevCurrentIPAddress
GevCurrentSubnetMask
GevCurrentDefaultGateway
GevCurrentIPConfigurationLLA
GevCurrentIPConfigurationDHCP
GevCurrentIPConfigurationPersistentIP
GevPrimaryApplicationIPAddress
deviceCCP
ExclusiveAccess
ControlAccess
GevDiscoveryAckDelay
GevHeartbeatTimeout
GevGVCPHeartbeatDisable
GevMCTT
GevMCRC
GevGVSPExtendedIDMode
GevStreamChannelSelector
GevSCPSFireTestPacket
GevMACAddress
Reports the current IP configuration status.
(RO)
None Device IP Configuration is not defined.
Device IP Address Configuration is set to
PersistentIP
Persistent IP (static).
Device IP Address Configuration is set to DHCP
DHCP
(Dynamic Host Configuration Protocol).
Network requires a DHCP server.
LLA Device IP Address Configuration is set to LLA
(Link-Local Address). Also known as Auto-IP.
Used for unmanaged networks including direct
connections from a device to a dedicated NIC.
ForceIP Device IP Address Configuration is set to
ForceIP. Used to force an IP address change.
Reports the IP address for the given network
interface. (RO)
Reports the subnet mask of the given
interface. (RO)
Reports the default gateway IP address to be
used on the given network interface. (RO)
Controls whether the LLA (Link Local Address)
IP configuration scheme is activated on the
given network interface. (RO)
Controls whether the DHCP IP configuration
scheme (Dynamic Host Configuration Protocol)
is activated on the given network interface.
Controls whether the PersistentIP configuration
scheme is activated on the given network
interface.
Returns the IP address of the device hosting
the primary application. (RO)
Controls the device access privilege of an
application.
Grants exclusive access to the device to an
application. No other application can control or
monitor the device.
Grants control access to the device to an
application. No other application can control
the device.
Indicates the maximum randomized delay the
device will wait to acknowledge a discovery
command. (RO)
Indicates the current heartbeat timeout in
milliseconds.
Disables the GVCP (GigE Vision Control
Protocol) heartbeat monitor. This allows
control switchover to an application on another
device.
Provides the transmission timeout value in
milliseconds.
Indicates the number of retransmissions
allowed when a message channel message
times out.
Enables the extended IDs mode.
Selects the stream channel to control. (RO)
When this feature is set to True, the device will
fire one test packet.
MAC address of the network interface. (RO)
Operational Reference • 91
1.00
Guru
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Guru
1.00
Guru
1.00
Guru
1.00
Guru
1.00
Guru
DFNC
1.00
Guru
1.00
Guru
1.00
Expert
1.00
Guru
1.00
Guru
1.00
Expert
1.00
Expert
1.00
Invisible
1.00
Invisible