Table of Contents
Advertisement
The FFC functions are grouped in the Advanced Processing category. For color correction, you
can use the tool provided by CamExpert. For more information, contact your local TCS (technical
customer support).
Note: Before performing a FFC, Teledyne DALSA recommends evaluating the "bare
image" characteristics, which determine the quality of FFC, applied to the image. A
bare image has no gains applied.
To obtain a bare image, disable FPN, PRNU, and color correction coefficients, set white balance,
red, green, and blue gains to 1x, and set the system gain to 1x.
1. Disable color correction coefficients by selecting
Transformation Matrix Selector under the Advanced Processing category.
2. Set red, green, and blue gains to 1x. Select the four options one-by-one in the Gain Selector, under the
Sensor Control category.
Type or use the numeric up-down control to set the value to 1. The Digital All option represents the
system gain.
3. Choose
Off
from the Flat Field Correction Mode.
Linea GigE Series Camera
NoCorrectionFactorySet
in the option of Color
Operational Reference • 67
Advertisement
Table of Contents
