Example: Counter Start Source = CounterEnd (itself)
Countermode=OFF
Counter is
IDLE
CounterStartSource=
CounterEnd (itself)
•
Counter starts when Counter Mode is set to Active.
•
A Counter Reset CMD will reset the counter to 00 and it then continues counting.
•
counterResetSource must be set to CounterEnd. When the counterValue feature reaches the
counterDuration value an event is generated and the counter is reset to 00, then continues.
Example: CounterStartSource = EVENT and Signal (Edge Base)
Countermode=OFF
Counter is
IDLE
CounterStartSource= EVENT or
Signal (Edge Base )
Linea GigE Series Camera
CounterStartSource=CounterEnd (itself)
Countermode=Active
CounterWait
Trigger
Counter is incrementing
0
CounterStartSource= EVENT and Signal (Edge Base )
Countermode=Active
CounterWait
Trigger
Counter is incrementing
0
CounterEnd Event Generated
Counter is
Counter
Active
Completed
CounterEnd Event Generated
Counter is
Counter
Active
Completed
Counter Reset CMD
CounterResetSource=CounterEnd
Counter
Overflow
CounterResetSource=OFF
Counter Reset CMD
CounterResetSource=Event (Itself)
CounterResetSource=Event
CounterResetSource=CounterEnd(Itself)
Operational Reference • 57