Teledyne Linea Color GigE LA-GC-02k05B User Manual page 39

Exposure Mode
Timed
Trigger Width
Exposure Time
Exposure Delay
Gain Selector
Digital
Digital Red
Digital Green
Digital Blue
Gain
Black Level Selector
Digital All
Black Level
Line Spatial Correction
Sensor Scan Direction
Internal Forward
Internal Reverse
Line1
Line2
Line3
Line4
Parallax Correction Line
Selector
Red_Blue
Green
Parallax Correction Pixel
Stretch
Linea GigE Series Camera
ExposureMode
Timed
TriggerWidth
ExposureTime
exposureDelay
GainSelector
DigitalAll
DigitalRed
DigitalGreen
DigitalBlue
Gain
BlackLevelSelector
DigitalAll
BlackLevel
sensorLineSpatialCorrection
sensorScanDirection
Forward
Reverse
Line1
Line2
Line3
Line4
imageDistortionCorrectionParall
axCorrectionSelector
Red_Blue
Green
imageDistortionParallaxCorrecti
onPixelStretch
Sets the operation mode for the camera's exposure.
The exposure duration time is set using the Exposure Time
feature and the exposure starts with a LineStart event.
Uses the width of the trigger signal pulse to control the
exposure duration. Use the Trigger Activation feature to
set the polarity of the trigger. The Trigger Width setting is
applicable when the LineStart trigger is enabled and a
signal is selected as trigger source.
Sets the exposure time (in microseconds) when the
Exposure Mode feature is set to Timed.
Specifies the delay in microseconds (µs) to apply after the
LineStart event before starting the ExposureStart event.
Selects which gain is controlled when adjusting
gain features.
Apply a digital gain adjustment to the entire image.
Apply a digital gain adjustment to the red channel only.
Apply a digital gain adjustment to the green channel only.
Apply a digital gain adjustment to the blue channel only.
Sets the selected gain as an amplification factor applied to
the image.
Selects which tap is controlled by the Black Level feature.
Black level (offset) in DN
Set the number of lines of delay between color planes that
are output from the sensor for Spatial Correction.
Controls the sensor scan direction.
Internal Forward: The sensor outputs from top to bottom
of the sensor line.
Internal Reverse: The sensor outputs from bottom to top
of the sensor line.
External: The sensor outputs direction is controlled by
Line1 level.
External: The sensor outputs direction is controlled by
Line2 level.
External: The sensor outputs direction is controlled by
Line3 level.
External: The sensor outputs direction is controlled by
Line4 level.
Select Parallax Correction either red_blue line or green line
Set Parallax Correction value of either red_blue or green
Operational Reference • 37
1.00
Beginner
1.00
Beginner
1.00
Beginner
DFNC
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Expert
1.00
Expert
DFNC
1.00
Beginner
DFNC
1.00
Beginner
DFNC
1.00
Beginner
DFNC