Parameter
Name
Action
Direction
Target Filter
4) Click OK.
Step 6
Configure alarm schedule and linkage.
1) Click
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
● On the time line, drag to set the period.
● You can also click
3) Configure alarm linkage. For details, see Table 5-50.
4) Click Apply.
Step 7
Select Enable checkbox and then click Apply.
5.9.7.2.3 Abandoned Object Detection
The system generates an alarm when there is an abandoned object in the specified zone.
Procedure
Step 1
Select Main Menu > AI > Parameters > IVS.
Table 5-34 Intrusion parameters
Description
Customize the rule name.
Set the intrusion action, including appear and crossing area.
Set the direction to cross the area, including enter, exit and both.
and then select effective target. With Human and Motor
Click
Vehicle selected by default, the system automatically identifies the
person and motor vehicle appeared within the monitoring range.
Figure 5-139 Schedule and alarm linkage
.
to set the period.
246
User's Manual