Configuring Patterns; Configuring Autoscan - Dahua NVR21-4KS3 Series User Manual

A preset will be added for this tour.
● You can repeat adding more presets.
● Click Delete Preset to delete the preset for this tour. This operation can be repeated to
delete more presets. Some protocols do not support deleting.

5.6.7.3.3 Configuring Patterns

Procedure
Step 1 On the expanded PTZ control panel, click
Click the Pattern tab.
Step 2
Step 3 In the Pattern box, enter the value for pattern.
Step 4 Click Start to perform the directions operations. You can also go to the PTZ Control Panel
to perform the operations of adjusting zoom, focus, iris, and directions.
Step 5 On the PTZ window, click End to complete the settings.

5.6.7.3.4 Configuring AutoScan

Procedure
Step 1 On the expanded PTZ control panel, click
Step 2 Click the Scan tab.
.
Figure 5-44 Pattern
.
152
User's Manual