5.14.3 Attack Defense
5.14.3.1 Firewall
You can configure the hosts that are allowed or prohibited to access the Device.
Procedure
Step 1
Select Main Menu > SECURITY > Attack Defense > Firewall .
Step 2
Click
Step 3
Select a firewall mode.
● Allow List: The hosts on the allowlist can access the Device.
● Block List: The hosts on the blocklist are prohibited to access the Device.
Click Add and then select a type for the allowlist or blocklist.
Step 4
You can allow or prohibit hosts through a specific IP address, a network segment, or a MAC
address.
● IP address.
Figure 5-282 Firewall
to enable the firewall.
390
User's Manual