Configuring Abnormal Detection - Dahua NVR21-4KS3 Series User Manual

Step 2 Select a channel, and then click Add.
Step 3 Select the Enable checkbox.
Step 4 Click
Step 5 Click
Alarm.
Step 6 Click
linkage, see Table 5-50.
Step 7 Click Apply.

5.9.12.5 Configuring Abnormal Detection

After configuring queuing alarm, the system can realize the corresponding linkage actions once the
number of people in the queue or the waiting time has triggered an alarm.
Procedure
Step 1 Select Main Menu > AI > Parameters > People Counting > Abnormal Detection.
Figure 5-179 Queuing
to draw queuing rule and area.
under Parameters, and then enable Queue People No. Alarm or Queue Time
under Trigger to configure alarm schedule and linkage. For details on alarm
288
User's Manual