Dahua NVR21-4KS3 Series User Manual page 428

Hide thumbs Also See for NVR21-4KS3 Series:

Table of Contents

● On the top right of the live view screen, use the left mouse button or press Shift to

switch between

allowed) to turn on/off the tour function.

● On the navigation bar, click

Configure the tour setting parameters.

Motion Tour, Alarm

Figure 5-299 Tour

(image switching is allowed) and

to enable the tour and click

Table 5-87 Tour parameters

Enable tour function.

Enter the amount of time that you want each channel group displays on

the screen. The value ranges from 5 seconds to 120 seconds, and the

default value is 5 seconds.

Select the View 1 or View 8 for Motion Tour and Alarm Tour (system

alarm events).

In the Live Layout list, select View 1, View 4, View 8, or other modes

that are supported by the Device.

User's Manual

(image switching is not

to disable it.