Parameter
Name
Direction
Target Filter
4) Click OK.
Step 6
Configure alarm schedule and linkage.
1) Click
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
● On the time line, drag to set the period.
● You can also click
3) Configure alarm linkage. For details, see Table 5-50.
4) Click Apply.
Step 7
Select the Enable checkbox and then click Apply.
5.9.7.2.2 Intrusion
When the detection target passes the edge of the monitoring area, and enters, leaves or traverses
the monitoring area, the system performs an alarm linkage action.
Procedure
Step 1
Select Main Menu > AI > Parameters > IVS.
Table 5-33 Tripwire parameters
Description
Customize the rule name.
Set the tripwire direction, including A → B, B → A and A↔B.
Click
and then select effective target. With Human and Motor
Vehicle selected by default, the system automatically identifies the
person and motor vehicle appeared within the monitoring range.
Figure 5-135 Schedule and alarm linkage
.
to set the period.
243
User's Manual