Configuring Anpr - Dahua NVR21-4KS3 Series User Manual

5.9.10.2 Configuring ANPR

Configure the ANPR alarm rules.
Procedure
Step 1 Select Main Menu > AI > Parameters > ANPR.
Step 2 Select a channel and then select the Enable checkbox to enable ANPR.
Step 3 (Optional) Enable Sync Vehicle Blocklist/Allowlist to synchronize the blocklist and
allowlist on the NVR to the connected camera.
Step 4 Click General (default), Blocklist or Allowlist tab.
Before enabling the blocklist alarm or allowlist alarm, you need to add the corresponding
plate information.
● General: The system triggers an alarm when it detects any plate number.
● Block List: The system triggers an alarm when it detects plate number on the blocklist.
● Allow List: The system triggers an alarm when it detects plate number on the allowlist.
Step 5 Click Setting next to Schedule to configure the arming period.
The system triggers corresponding alarm actions only during the arming period.
● On the time line, drag to set the period.
Figure 5-174 ANPR
281
User's Manual