Dahua NVR21-4KS3 Series User Manual page 320

1) Click Add.
2) Configure parameters.
Parameter
Type
Scene Name
Main Camera
Sub Camera
Click Apply.
Step 3
The monitoring area is successfully added.
Step 4 Configure calibration points to set the binding relationship of fisheye camera and speed
dome.
Set a distant place as the first calibration point to improve accuracy.
1) Click
2) Click the target place on the video of fisheye camera, or move
The video at upper-left corner is the fisheye camera screen, and the video at upper-
right corner is the speed dome screen.
3) Adjust position through the icons below the speed dome screen to make the center of
speed dome identical to the
The on the speed dome screen is the center of speed dome.
Icon
,
,
,
Table 5-51 Main-sub tracking parameters
Description
Select a type according to the number of fisheye and PTZ cameras:
● 1 Fisheye + 1 PTZ.
● 1 Fisheye + 2 PTZ.
● 1 Fisheye + 3 PTZ.
Customize the scene name.
Select a fisheye camera.
a. Click Select in Main Camera line.
b. Select a fisheye camera.
c. Click Apply.
Select speed domes as needed.
a. Click Select in Sub Camera line.
b. Select speed domes.
c. Click Apply.
or double-click the target scene.
of fisheye camera.
Table 5-52 Icon description
Description
Zoom in and zoom out.
Adjust resolution.
Adjust height.
300
User's Manual
to the target place.