2) Configure parameters.
Parameter
Name
Sensitivity
Duration
Repeat Alarm Time
3) Click OK.
Step 5
Configure alarm schedule and linkage.
1) Click
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
● On the time line, drag to set the period.
● You can also click
3)
Configure alarm linkage. For details, see Table 5-50.
4) Click Apply.
Step 6
Click Apply.
5.9.8.3 AI Search (Stereo Analysis)
You can search for detection results of stereo analysis.
Procedure
Step 1
Select Main Menu > AI > AI Search > Stereo Analysis.
Table 5-45 Parameters of people stay detection
Description
Customize the rule name.
Set alarm sensitivity.
Set low long people stay in the detection area until an alarm is
triggered.
Set repeat alarm time. If the alarm-triggering event continues, an
alarm will be triggered again when repeat alarm time passed.
Figure 5-163 Schedule and alarm linkage
.
to set the period.
270
User's Manual