Parameter
Private Protocol
Authentication Mode
LLDP
Step 3
Click Apply.
5.14.2.2 802.1x
The Device needs to pass 802.1x certification to enter the LAN.
Procedure
Select Main Menu > SECURITY > System Service > 802.1x.
Step 1
Step 2
Select the Ethernet card you want to certify.
Select Enable and configure parameters.
Step 3
Description
● Security Mode (Recommended): Uses Digest access
authentication when connecting to NVR.
● Compatible Mode: Select this mode when the client does not
support Digest access authentication.
Enable the LLDP service.
The Link Layer Discovery Protocol (LLDP) allows two different
devices to collect hardware and protocol information about
neighboring devices, which is useful in troubleshooting the
network.
Figure 5-280 802.1x
388
User's Manual