Step 2
Click each tab and then select an event type.
● Disk: The system detects HDD error, no HDD, no space, and other HDD events.
● Network: The system detects network errors such as disconnection, IP conflict, and
MAC conflict.
● Device: The system detects device errors such as abnormal fan speed and network
security error.
Step 3
Click
Step 4
(Optional) If the event type is Low Space, you need to configure the threshold of storage
space.
When the storage space is lower than the threshold, an alarm is triggered.
Step 5
Configure alarm linkage. For details, see Table 5-50.
Step 6
Click Apply.
5.10.9 Disarming
You can disarm all alarm linkage actions as needed through one click.
Procedure
Step 1
Select Main Menu > ALARM > Disarming.
Step 2
Select On for Disarming to enable disarming.
Figure 5-215 Disk exception
to enable the function.
326
User's Manual