Matrix 2 Of 5 Set Length 1; Matrix 2 Of 5 Set Length 2 - Datalogic PowerScan PD96 Series Product Reference Manual

Industrial corded and cordless handheld area imager bar code reader
Hide thumbs Also See for PowerScan PD96 Series:
Table of Contents

Advertisement

MATRIX 2 OF 5

Matrix 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for "
page 155
fixed length if in Fixed Length Mode. The length includes the bar code's check and data
characters.
The length can be set from 1 to 50 characters. See "
detailed programming instructions.
Select Matrix 2 of 5 Length 1 Setting
$CM2L1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Matrix 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for "
page 155
ond fixed length if in Fixed Length Mode. The length includes the bar code's check and
data characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to ignore this
length (only one fixed length). See "
gramming instructions.
Select Matrix 2 of 5 Set Length 2 Setting
$CM2L2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
. Length 1 is the minimum label length if in Variable Length Mode, or the first
Length 1 = 01 (1 character)
. Length 2 is the maximum label length if in Variable Length Mode, or the sec-
Length 2 = 50 (50 characters)
ENTER/EXIT PROGRAMMING MODE
Standard 2 of 5 Length Control" on
Set Length 1" on page 301
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
Standard 2 of 5 Length Control" on
Set Length 2" on page 302
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
PRODUCT REFERENCE GUIDE
for more
represent-
for more detailed pro-
represent-
153

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents