Table of Contents
Advertisement
Introduction
This manual provides detailed instructions for setting up and using the NLS-HR52 wireless 2D barcode scanner
(hereinafter referred to as "the HR52" or "the scanner") and NLS-CD52 cradle (hereinafter referred to as "the CD52" or
"the cradle").
Chapter Description
Chapter 1 Getting Started
Chapter 2 EasySet
Chapter 3 System Settings
Chapter 4 Wireless Communications
Chapter 5 RS-232 Interface
Chapter 6 USB Interface
Chapter 7 Symbologies
Chapter 8 Data Formatter
Chapter 9 Prefix & Suffix
Chapter 10 Batch Programming
Appendix
1
Preface
: Gives a general description of HR52 scanner and CD52 cradle.
: Introduces a useful tool you can use to set up HR52 scanner and develop
new applications.
: Introduces three configuration methods and describes how to configure
general parameters of HR52 scanner.
: Describes how to configure the parameters necessary for wireless
communication between the scanner, cradle and host device.
: Describes how to configure RS-232 communication parameters.
: Describes how to configure USB communication parameters.
: Lists all compatible symbologies and describes how to configure the
relevant parameters.
: Explains how to customize scanned data with the data formatter.
: Describes how to use prefix and suffix to customize scanned data.
: Explains how to integrate a complex programming task into a single
barcode.
: Provides factory defaults table and a bunch of frequently used
programming barcodes.
Advertisement
Table of Contents
