Newland NLS-HR52 User Manual page 260

Enter Setup
Modify PDF417 Code ID to be "p" (HEX: 0x70):
1. Scan the Enter Setup barcode.
2. Scan the Modify PDF417 Code ID barcode.
3. Scan the numeric barcodes "7" and "0" from the "Digit Barcodes" section in Appendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5. Scan the Exit Setup barcode.
Restore the default Code IDs of all symbologies:
1. Scan the Enter Setup barcode.
2. Scan the Restore All Default Code IDs barcode.
3. Scan the Exit Setup barcode.
** Exit Setup 244