Table of Contents
Advertisement
Retransmission Count
This parameter specifies the number of times the scanner resends a data packet when it awaits an ACK response from the
host. The selection range is from 1 to 10 retransmissions. The default value is 3 (retransmissions). Note that the
Retransmission feature must be turned on for this to function.
Set the retransmission count to 5:
1. Scan the Enter Setup barcode.
2. Scan the Set Retransmission Timeout barcode.
3. Scan the numeric barcodes "3", "0" and "0" from the "Digit Barcodes" section in Appendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5. Scan the Exit Setup barcode.
55
Set Retransmission Count
Enter Setup
** Exit Setup
Advertisement
Table of Contents
