Set Date And Time; Query Current Date And Time; Time Stamp - Newland NLS-HR52 User Manual

Set Date and Time

You may use the following command to set the date and time on your scanner:
WLSTIMyyyymmddhhmmss (yyyy: The desired year; mm: The desired month; dd: The desired day; mm: The desired
month; ddmmss: The desired time)
Example: Set the date to February 5
Enter: ~<SOH>0000@WLSTIM20180205103011;<ETX>

Query Current Date and Time

After scanning the barcode below, the current date and time in YYYYMMDDHHMMSS format will be sent to the host device.
For example, query result "20180205103011" means February 5

Time Stamp

You can select whether or not to send date & time before each scanned data by scanning the appropriate barcode below.
** Do Not Send Time Stamp
57
th
2018 and time to 10:30:11
Query Current Date and Time
th
2018 10:30:11.
Send Time Stamp
Enter Setup
** Exit Setup