Transmit Preamble Character; Convert Upc-E To Upc-A - Newland NLS-HR52 User Manual

Enter Setup

Transmit Preamble Character

Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-E barcode. Select one of
the following options for transmitting UPC-E preamble to the host device: transmit system character only, transmit system
character and country code ("0" for USA), or transmit no preamble.
** System Character
No Preamble
System Character & Country Code

Convert UPC-E to UPC-A

Convert UPC-E to UPC-A: Convert UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After
conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check
Character).
Do Not Convert UPC-E to UPC-A: UPC-E decoded data is transmitted as UPC-E data, without conversion.
** Do Not Convert UPC-E to UPC-A
Convert UPC-E to UPC-A
** Exit Setup 106