Good Read Beep Frequency - Newland NLS-HR52 User Manual

Good Read Beep Frequency

This parameter is programmable in 1Hz increments from 20Hz to 20,000Hz.
Extra Low (800Hz)
** Medium (2730Hz)
Custom (20 - 20,000Hz)
Set the Good Read Beep frequency to 2,000Hz:
1. Scan the Enter Setup barcode.
2. Scan the Custom barcode.
3. Scan the numeric barcodes "2", "0", "0" and "0" from the "Digit Barcodes" section in Appendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5. Scan the Exit Setup barcode.
27
Enter Setup
Low (1600Hz)
High (4200Hz)
** Exit Setup