Introduction
This manual provides detailed instructions for setting up and using the NLS-NVH300 Industrial Handheld Barcode Scanner
(hereinafter referred to as "the NVH300" or "the scanner").
Chapter Description
Chapter 1 Getting Started
Chapter 2 EasySetEX
Chapter 3 System Settings
Chapter 4 RS-232 Interface
Chapter 5 USB Interface
Chapter 6 Symbologies
Chapter 7 Data Formatter
Chapter 8 Prefix & Suffix
Chapter 9 Batch Programming
Appendix
1
Preface
: Gives a general description of NVH300 scanner.
: Introduces a useful tool you can use to set up NVH300 scanner and
develop new applications.
: Introduces three configuration methods and describes how to configure
general parameters of NVH300 scanner.
: Describes how to configure RS-232 communication parameters.
: Describes how to configure USB communication parameters.
: Lists all compatible symbologies and describes how to configure the
relevant parameters.
: Explains how to customize scanned data with the data formatter.
: Describes how to use prefix and suffix to customize scanned data.
: Explains how to integrate a complex programming task into a single
barcode.
: Provides factory defaults table and a bunch of frequently used
programming barcodes.