Table of Contents
Advertisement
Connecting the Cradle to a Host
The cradle must be connected to a host in actual application, such as PC, POS or any intelligent terminal with USB or
RS-232 port, using a communication cable (USB or RS-232 cable).
USB
RS-232
Note: Please check the port on the host and purchase the cable accordingly.
Using USB Cable
Connect the cradle to a Host using a USB cable with RJ45 and USB connectors:
1.
Plug the RJ45 connector of the cable into the data port on the cradle.
2.
Plug the USB connector of the cable into the USB port on the Host.
3.
Plug the supplied power adapter into the power jack on the cradle.
11
USB port on the Host
RS-232 port on the Host
Advertisement
Table of Contents
