Introduction
This manual provides detailed instructions for setting up and using the NLS-HR42 2D handheld barcode scanner
(hereinafter referred to as "the HR42" or "the scanner").
Chapter Description
Chapter 1 Getting Started
Chapter 2 EasySetEX
Chapter 3 System Settings
Chapter 4 RS-232 Interface
Chapter 5 USB Interface
Chapter 6, Symbologies
Chapter 7 Data Formatter
Chapter 8 Prefix & Suffix
Chapter 9 Batch Programming
Appendix
1
Preface
: Gives a general description of the HR42.
: Introduces a useful tool you can use to set up the HR42.
: Introduces three configuration methods and describes how to configure
general parameters of the HR42.
: Describes how to configure RS-232 communication parameters.
: Describes how to configure USB communication parameters.
: Lists all compatible symbologies and describes how to configure the relevant
parameters.
: Explains how to customize scanned data with the data formatter.
: Describes how to use prefix and suffix to customize scanned data.
: Explains how to integrate a complex programming task into a single barcode.
: Provides factory defaults table and a bunch of frequently used programming
barcodes.