Transmit Stored Data; Auto Clear Stored Data After Transmission; Query/Clear Stored Data In Flash - Newland NLS-HR52 User Manual

Enter Setup

Transmit Stored Data

You may scan the barcode below to send the stored data in the flash memory to the host.
Transmit Stored Data

Auto Clear Stored Data after Transmission

You may scan the appropriate barcode below to choose whether to clear or keep the stored data in the flash memory after
transmission This feature is only available to the Manual Batch mode.
** Off
On

Query/Clear Stored Data in Flash

Query the Number of Stored Barcodes
Clear All Stored Data
53 ** Exit Setup