Table of Contents
Advertisement
Sensitivity (Sense Mode)
This specifies the degree of acuteness of the scanner's response to changes in images captured. There are 20 levels to
choose from. The smaller the value, the higher the sensitivity and the lower requirement in image change to trigger the
scanner. You can select an appropriate degree of sensitivity that fits your application environment. This feature is only
applicable to the Sense mode.
Low Sensitivity
High Sensitivity
Custom Sensitivity
Set the sensitivity to Level 10:
1. Scan the Enter Setup barcode.
2. Scan the Custom Sensitivity barcode.
3. Scan the numeric barcodes "1" and "0" from the "Digit Barcodes" section in Appendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5. Scan the Exit Setup barcode.
35
(Level 1-20)
Enter Setup
** Medium Sensitivity
Enhanced Sensitivity
** Exit Setup
Advertisement
Table of Contents
