Pulsing In An Upslope/Downslope; Welding Torch (Operating Variants); Welding Torch Mode - EWM T5.01-DC Comfort 3.0 Operating Instructions Manual

Functional characteristics
TIG welding

5.1.10.4 Pulsing in an upslope/downslope

The pulse function can also be deactivated if necessary during the up-slope and down-slope
phases (parameter

5.1.11 Welding torch (operating variants)

5.1.11.1 Welding torch mode

The operating elements (torch triggers or rockers) and their function can be individually adapted using
various torch modes. Up to six modes are available to the user. The tables for the corresponding torch
types describe the functional options.
Explanation of symbols for welding torch:
Symbol
BRT 1, 2
UP
DOWN
The torch modes are set using the torch configuration parameters "
menu > torch mode "
Only the modes listed are suitable for the corresponding torch types.
Welding torch with one torch trigger
Function
Welding current On / Off
Secondary current (in latched operation)
38
) > see 5.9 chapter.
Description
Press torch trigger
Tap torch trigger
Tap torch trigger and then press
Torch trigger 1 or 2
Torch trigger UP - increase the value
Torch trigger DOWN - decrease the value
" > see 5.9 chapter.
Figure 5-20
" in the machine configuration
Figure 5-21
Operation Mode
BRT 1
099-00T501-EW501
1
1.8.2022